BrainParrot

MeitY Revises Public Procurement (Preference to Make in India) Order 2020, For Six IT Hardware Products To Promote Domestic Manufacturing

GS3Full notePublished: · Updated:

Source: PIB (Press Information Bureau) · Read the original ↗

Summary

  • MeitY revised its earlier notification of 7 September 2020 on how Local Content/Domestic Value Addition (DVA) is calculated for six IT-hardware products under the Public Procurement (Preference to Make in India) Order, 2017.
  • The new method is process-oriented and based on a Bill of Materials (BoM). It gives credit for manufacturing steps done in India, for in-house R&D, and for Indian product design and IPR.
  • It takes effect six months after publication in the Official Gazette and supersedes the corresponding provisions of the 2020 notification for these six products.

UPSC relevance: GS3 — Economy/S&T (industrial policy, electronics manufacturing, Make in India); GS2 — Governance (public procurement)

Key facts for Prelims

  • PPP-MII Order, 2017: DPIIT (Ministry of Commerce & Industry) policy; MeitY is the Nodal Ministry for IT hardware.
  • Class-I local supplier ≥ 50% local content; Class-II ≥ 20% but < 50%; Non-local < 20%; margin of purchase preference 20%.
  • Local content = value added in India (value minus imported content, as a percentage of total value).
  • Nodal Ministries can prescribe higher minimum local-content thresholds.
  • DVA = Domestic Value Addition; BoM = Bill of Materials; SMT = Surface Mount Technology; PCB = printed circuit board; SSD = solid-state drive; RAM = memory.
  • The article's body names the Order as the "Public Procurement (Preference to Make in India) Order, 2017" (the headline refers to it with the year 2020).
  • Gazette notification triggers the six-month countdown.

Data and details

  • Scope: six IT-hardware products (the article does not name them).
  • Revised notification replaces the earlier one dated 7 September 2020 (for these six products only).
  • Eligible in-India processes recognised in the BoM-based DVA calculation: mainboard/motherboard assembly through SMT; domestic sourcing of bare PCB; assembly, testing and packaging of RAM and SSD; display assembly processes; domestic sourcing of chassis and power module; final assembly and testing.
  • In-house R&D undertaken in India gets "adequate weightage"; Indian product design and IPR get additional weightage.
  • A standardised format for DVA calculation and self-certification is introduced, aimed at objectivity, transparency and objective verification of self-declared DVA where required.
  • Effective date: six months from publication in the Official Gazette.
  • Stated aims: promoting domestic manufacturing, strengthening indigenous capabilities, generating employment.
  • Absent from the article: the six product names, the actual weightage numbers or DVA thresholds, the Gazette date, and the penalty/verification process details.

Static–dynamic linkage

The government is a large buyer, so its procurement rules can create demand for domestic goods. Under PPP-MII, local suppliers get preference in public purchases, and each Nodal Ministry can notify product-specific local-content thresholds and methods. The revision changes how "local content" is measured for IT hardware. Instead of counting value alone, it credits specific in-country processes (SMT assembly, PCB sourcing, final assembly), R&D, design and IPR, which pushes manufacturers towards deeper manufacturing rather than screwdriver-type assembly. It also standardises self-certification to make DVA claims verifiable.

Syllabus mapping: GS3 – Economy: industrial policy, manufacturing, investment, Make in India/Atmanirbhar Bharat; GS3 – S&T: indigenisation of electronics, IPR; GS2 – Governance: public procurement as a policy tool.

Background primer

Public Procurement (Preference to Make in India) Order, 2017 (PPP-MII)

What it is:
an order of the Department for Promotion of Industry and Internal Trade (DPIIT, Ministry of Commerce and Industry). It gives Class-I local suppliers purchase preference over others to give momentum to Make in India.
Founded:
issued 15 June 2017 under Rule 153(iii) of the General Financial Rules, 2017, as an enabling provision to promote domestic value addition. Amendments are covered in 2b.

Additional context

  • The Order was amended on 16 September 2020. It fixed 50% (Class-I) and 20% (Class-II) as minimum floors and allowed Nodal Ministries to prescribe only higher thresholds. The MeitY notification being revised dates from 7 September 2020, so the new revision updates MeitY's product-specific method rather than the general Order.
  • A further amendment of the Order is dated 19 July 2024.
  • In global tender enquiries, Non-local suppliers can also bid alongside Class-I and Class-II suppliers.

Mains dimensions

  • Procurement as industrial policy: government demand is used to build local manufacturing; this also overlaps with PLI schemes (PLI manufacturers are deemed Class-II suppliers).
  • From assembly to depth: crediting SMT, PCB, memory/storage, display, chassis and power-module sourcing nudges firms beyond final assembly, addressing the low-value-addition criticism of electronics assembly in India.
  • R&D, design and IPR: extra weightage for Indian design and IPR rewards innovation and technological self-reliance, not only factory output.
  • Transparency and compliance: standardised self-certification with verification reduces gaming of local content claims. The risk is that self-declaration can still be inflated unless audits are credible, which the paper trail (BoM) is meant to address.
  • Trade and cost concerns: domestic-preference rules can raise costs for government buyers and prompt WTO-related or partner concerns. The six-month lead time allows industry to adjust.
  • Employment and supply chains: the stated aim is employment generation and reduced import dependence in IT hardware, which also has a security dimension (trusted hardware).

Possible Mains question

**GS3, 10 marks:** "Public procurement preferences can be an effective tool of industrial policy. Discuss with reference to the revised Domestic Value Addition framework for IT hardware under the Public Procurement (Preference to Make in India) Order."

Related topics

  • Make in India, Atmanirbhar Bharat, PLI schemes for IT hardware and electronics
  • India Semiconductor Mission, electronics component manufacturing
  • General Financial Rules (GFR), GeM (Government e-Marketplace)
  • WTO Government Procurement Agreement (India's non-membership), trade defence
  • IPR and indigenous design capability

Topics: GS3

How we write and check these notes →

All current affairs of 20 November 2026 → · UPSC Current Affairs