BrainParrot

Quality control and India’s manufacturing growth

GS3Full notePublished: · Updated:

Source: The Hindu, 24 September 2026

Summary

  • The op-ed argues that India's Quality Control Order (QCO) reassessment must keep moving. The goal is firms that can scale up, join global value chains and compete abroad.
  • QCOs cover a rising number of products. The government has begun revoking or suspending some, especially those on intermediate goods, and has issued the Transition Facilitation (Quality Control) Order, 2026.
  • A CSEP study on chemical QCOs shows that input-side QCOs hurt downstream firms of all sizes, though in different ways.

UPSC relevance: GS3 Economy — Industrial policy, MSMEs, trade policy (non-tariff barriers)

Key facts for Prelims

  • QCOs are issued under Section 16 (read with Sections 17 and 25(3)) of the BIS Act, 2016. Violations attract penalties under Section 29(3).
  • The Transition Facilitation (Quality Control) Order, 2026 was notified by DPIIT (Ministry of Commerce and Industry) on 25 June 2026. It lets eligible firms source from BIS Scheme-II (Registration Scheme) licensed suppliers instead of Scheme-I (ISI Mark Scheme) suppliers.
  • Sectors named in the article for the transition route: toys, footwear, air conditioners. Access needs eligibility criteria and approval by a DPIIT-constituted committee.
  • BIS certification is voluntary by default. It becomes compulsory through QCOs for public-interest reasons.
  • WTO's eighth Trade Policy Review of India was held in July 2026. The TPR is a core WTO function, held about every five years for India.
  • Chemicals are intermediate inputs for rubber and plastics, pharmaceuticals and electronics.
  • Policy goal cited: Viksit Bharat 2047.

Data and details

  • Coverage: Products under QCOs rose from 88 (2019) to 765 by end-December 2024. The pace slowed considerably towards the end of 2025 as several QCOs were revoked or suspended, particularly on intermediate goods.
  • Remaining reassessment: More than 600 QCO-covered products are yet to be reassessed. They include critical intermediates in chemicals, steel, textiles, machinery and electronics, and rubber and plastics.
  • WTO TPR: QCO and NTB concerns were raised by the EU and the US. They were also raised by BRICS partners Brazil, China and Indonesia.
  • CSEP chemicals study:
  • The first chemical QCO came in 2018. Covered chemical products reached 52 by 2024.
  • The share of chemical-using firms exposed to input-side regulation rose from 11.8% (2019) to 56.6% (2024).
  • Larger firms: production up 9.6%, but gross value added (GVA) down 37%. This suggests higher input costs and only partial pass-through to output prices.
  • Smaller firms: no statistically significant effect on production or GVA, but profitability down 47.6%.
  • The article's reading is that even larger firms, which can absorb shocks, lose value addition. So the harm is not confined to small firms.

Static–dynamic linkage

  • A QCO is a legal tool under the BIS Act, 2016. It makes the Indian Standard mark compulsory for named products, to protect safety, health and consumers and to curb unfair trade.
  • The static tension is between quality regulation and cost, scale and competitiveness. A QCO on a final consumer good protects the buyer. A QCO on an intermediate input raises costs for every downstream user and can disrupt supply chains.
  • Standards also work as non-tariff barriers (NTBs) under the WTO's Technical Barriers to Trade framework. That is why trade partners complain about them.

Syllabus mapping: GS3 – Economy: Industrial policy, MSMEs, infrastructure/manufacturing growth; GS2 – International institutions (WTO); GS3 – Economy: Non-tariff barriers and trade policy

Background primer

Quality Control Order (QCO)

What it is:
A notification by the Central Government, usually through a line ministry or regulator, that directs mandatory use of the BIS Standard Mark (e.g. the ISI mark) for notified products. BIS certification is voluntary by default. Compliance is made compulsory on grounds such as public interest, human, animal or plant health, environmental safety, prevention of unfair trade practices and national security.
Why it matters:
QCOs are aligned with the WTO's Technical Barriers to Trade Agreement. They aim to ensure product safety, curb substandard goods and protect consumers.

Bureau of Indian Standards (BIS)

What it is:
India's national standards body. It implements QCOs and runs product certification. Indian Standards formulated by BIS form the basis of product certification schemes, which give consumers third-party assurance of quality.
Founded:
Evolved from the Indian Standards Institution (set up 1947) into the statutory BIS under the BIS Act, 1986. It is now governed by the BIS Act, 2016, which replaced the 1986 Act.
Mandate:
Formulate standards, certify products, and give technical inputs to ministries framing QCOs.

WTO Trade Policy Review (TPR) Mechanism

What it is:
One of the WTO's three core functions, alongside negotiations and dispute settlement. It examines the trade policies of members at regular intervals.
Why it matters:
Transparency, predictability and mutual understanding of members' trade policies.

Additional context

  • India's eighth TPR: The review met on 21 and 23 July 2026. Several members sought clarification on QCOs, among other issues. It covered 1 January 2021 to 31 December 2025. India's Commerce Secretary said QCOs serve legitimate public policy objectives.
  • Earlier rollback, November 2025: The Centre withdrew QCOs on 14 items, including plastics, polymers, synthetic fibres and yarns, on the recommendation of a high-level committee led by NITI Aayog member Rajiv Gauba. The withdrawal took effect on 12 November. An internal report had suggested cancelling QCOs for over 200 products.
  • Revocations and suspensions in 2025-26: According to BIS, 46 QCOs covering 51 products were revoked in 2025–26. Three QCOs covering 63 products, and 20 categories of machinery and electrical equipment under the Omnibus Technical Regulation, were deferred or suspended. The Ministry of Steel suspended QCO enforcement for 55 standards.
  • SEZ exemption: On 2 June 2026 the DGFT exempted imports by SEZ units and developers from QCOs and mandatory BIS certification, if the goods are used for authorised operations within the SEZ.
  • How the Transition Order works (PIB, 25 June 2026):
    • Permission depends on technical capability, compliance history, and commitment to technology adoption, design and R&D capability, innovation and domestic supply-chain strengthening.
    • The benefit also extends to manufacturers with three continuous years of QCO compliance without default.
    • It was notified as S.O. 3417(E) dated 25.06.2026.
    • Applicants must be companies incorporated under the Companies Act, 2013.
  • Critique of the Order: One commentary notes that licences under the new system are initially valid for two years and are renewable. The same commentary argues that selective exemptions add uncertainty.

Mains dimensions

  • Purpose versus side-effects: QCOs protect consumers and curb substandard imports. But mandatory certification of inputs raises concerns about availability, cost and supply-chain disruption. That is why several intermediate-goods QCOs were revoked or suspended.
  • Scale versus value addition: In the CSEP study, larger firms expanded output (+9.6%) while GVA fell 37%. Output growth alone can hide a decline in domestic value addition.
  • MSME burden: Smaller firms show no significant output or GVA change, but profits fall 47.6%. They have limited ability to absorb input costs and compliance costs. The article calls for dedicated certification and compliance assistance, plus exemptions or transition periods.
  • Trade-policy angle: QCOs are seen as NTBs. Concerns came from the EU and US and also from BRICS partners at the WTO TPR. This matters for India's trade negotiations and for integration into global value chains.
  • Transition Order, a partial fix: It eases sourcing in toys, footwear and air conditioners, but only through eligibility criteria and committee approval. This is discretionary and limited to specified sectors. Over 600 products remain.
  • Way forward from the article:
  • Make supply-chain impact an integral part of both designing new QCOs and reassessing old ones.
  • Prioritise intermediate goods in the next phase of rationalisation.
  • Judge quality standards by whether they improve quality without constraining scale, efficiency and competitiveness, not by how many products they cover.

Possible Mains question

**GS3, 15 marks:** "Quality Control Orders aim to improve product quality but may constrain manufacturing scale and global integration. Critically examine the case for rationalising QCOs on intermediate goods, with reference to MSMEs."

Related topics

  • BIS Act, 2016 and BIS (Conformity Assessment) Regulations, 2018
  • WTO: Technical Barriers to Trade (TBT) Agreement, non-tariff barriers and the Trade Policy Review Mechanism
  • MSME policy and Make in India / PLI schemes
  • Global value chains and domestic value addition
  • Viksit Bharat 2047 goals for manufacturing

Topics: GS3Economy

How we write and check these notes →

All current affairs of 24 September 2026 → · UPSC Current Affairs